2016 F 450 High Idle Problem
#1
Senior Member
Thread Starter
2016 F 450 High Idle Problem
Hi everyone. I'm new to the SD world. I have a 2016 F 450 that I'm trying to hook up the high idle mod on. I have the Ford Body Builders sheets for my truck and have found the wires under the dash, but as far as I can see one is missing. It's the PTO reference wire(white/brown). I've found all the other needed wires, but not that one. I'm at a loss. Any insight or help would be greatly appreciated.
#2
Senior Member
Thread Starter
UPDATE:
Ok, upon closer inspection I found another wire that looked to me to be a white/black stripe wire. I checked all the body builders sheets and I couldn't find any listing for this color. So I took a shot and hooked this wire up to my potentiometer and lo and behold it worked! I even took the small piece I cut off and looked at it under normal light, and that is the blackest looking brown stripe I've ever seen. So if anyone else has this issue there's your fix.
Ok, upon closer inspection I found another wire that looked to me to be a white/black stripe wire. I checked all the body builders sheets and I couldn't find any listing for this color. So I took a shot and hooked this wire up to my potentiometer and lo and behold it worked! I even took the small piece I cut off and looked at it under normal light, and that is the blackest looking brown stripe I've ever seen. So if anyone else has this issue there's your fix.