Transmission lines to radiator
12-28-2007, 10:12 PM
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: Florida
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Transmission lines to radiator
Greetings,
I started replacing the radiator in the F150 and found that the two lines running from the transmission are rotten. I do not have a bending kit. Is there anywhere these lines can be ordered already made. Local auto parts just have the straight tubing.
By the way, I bought the radiator from Advanced Auto for $149. A little better than the $300 I was going to get nailed with.
Thanks for any help.
Regards
Chad
I started replacing the radiator in the F150 and found that the two lines running from the transmission are rotten. I do not have a bending kit. Is there anywhere these lines can be ordered already made. Local auto parts just have the straight tubing.
By the way, I bought the radiator from Advanced Auto for $149. A little better than the $300 I was going to get nailed with.
Thanks for any help.
Regards
Chad
12-28-2007, 10:20 PM
#2
AdvanceAutoPartsManager
Join Date: Dec 2007
Location: Huntsville,al
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
You are the man....
And about the bending, we sell the tool for like ten dollars..and some carquest employees will make the line for you if you are lucky, but not any of tem around here.
And about the bending, we sell the tool for like ten dollars..and some carquest employees will make the line for you if you are lucky, but not any of tem around here.
