shredtilldead13

my speedometer only works when i give it gas.
most of the time it just sits at zero.
sometiems it will work in 1st and second gear then cut out all together after third and wont start again.
sometimes only high revs

very random

any ideas why?

hcbph

Does your's have a speedometer cable and have you checked it? Had one lose part of one end and it acted somewhat similar.

shredtilldead13

yes, it has a cable.

my friend says to try greasing the cable where it meets the speedometer.

do you have any ideas?

GL~

The plastic gear at the end of the cable in the transmission might be worn out.

shredtilldead13

the plastic gear looks good.

eagle1978

you could have a broken cable, sometimes they will act like you describe by grabbing once in a while and showing a reading but mostly the needle will just sit, hence why it works when you hit the gas, the "jerk" makes it grab. I may be way off on yours but it's worth checking out. have someone help you by spinning one end and look to see if its moving on the other, simple as that.