Lift kit info needed...
#1
Junior Member
Thread Starter
Join Date: Apr 2015
Location: Kickin back in Elk Grove, CA.
Posts: 9
Received 0 Likes
on
0 Posts
Lift kit info needed...
I have a 1979 f150 and Ive been looking at lifting it. Ive been bouncing back and forth between a 6 inch lift or a 9 inch lift just because I want the clearance. Any suggestions?? Any tire size info would be great too!
#2
Junior Member
6 inch lift will be your best bet, it may be pushing it at that. any higher and your driveshaft will bind and you will be spitting U-Joints left and right. Im new to the whole 4x4 part but i have been building cars since i was 12. Im new to the tire world too XD Best bet with a 6 would be 35x12.5xwhatever rim you are running. Im currently running 33x12.5x15 with a 4 lift and no rubbing problems.
#4
Junior Member
No problem man, driveshafts can definitly be a b**** to work around XD 35's would give you a pretty good combo of articulation/travel, and they wont rub as much.
#5
Junior Member
Thread Starter
Join Date: Apr 2015
Location: Kickin back in Elk Grove, CA.
Posts: 9
Received 0 Likes
on
0 Posts
Sounds good. And they defnitly can. Ive already had to replace my front driveshaft because the stock one twisted not lookin to relive those days XD