craupe

Hoping someone can help me out here. I have an 84 F150 Reg Cab 8ft bed with the 302. Recently the fuel lines on top of both tanks started rotting away. I have removed the bed and am in the process of thoroughly cleaning both tanks and replacing all rubber components under bed while I am at it. I have cleaned the front tank and am wanting to put back on, but cannot seem to locate ANYWHERE the proper size for the fuel filler neck hose. When removing bed, I cut the filler hoses, not knowing they would be so hard to find replacements. I can easily find the outer filler hose on LMC, but cannot locate the inner plastic hose.

Does ANYONE know the size of that hose or somewhere I can get one other than a junkyard?

Thanks!!!

GhostriderI

Welcome to the site

The inter hose is a thin walled flexible (as in not stiff walled) vent hose about 3/4 to 7/8 inch, you can run without it, but, refueling will be real slow.

Hope this helps