1986 F150 resto project
#11
vertical pin buster
I'd just put a heavy coat of spray paint. Just to get thru the winter then sand and prep and try POR15 . Or you could just put some used oil in a spray bottle and go to town. Then run 'er down a dusty road. That'll get ya thru for awhile
#12
Senior Member
I definitely wouldn't sand and prep and then just leave it alone for 5 months. Between pressure washer, engine degreaser, and sanding, any film you put on now would come off without too much trouble in a few months.
#15
Senior Member
Looking good
#16
following