Turn Signal / Hazard Problem
11-15-2015, 10:35 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2015
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Turn Signal / Hazard Problem
At my wits end here. I've been toying with this issue for a few months.
Problem: Hazards do not work. Left turn signal works with and without the headlights on. But, when I DO turn the lights on. The right turn signal stays on.
Also, if I use the right signal. It doesn't show the blinking hazard lights, but all the turn signals outside the cab blink.
Solutions I've tried:
- Replaced all the bulbs, found some bad grounds, cleaned 'em up. That's how the left side started working.
- Replaced the fuse and blinker ( That round cylinder thingie. )
- Replaced the Multi-function Turn signal/hazard thing in the steering column and cleaned up the wiring there as well.
- Cleaned up the two connections for the tail-lights underneath the truck.
From what I can see, there doesn't seem to be any problem with the wires. But, I was considering hacking them all our and wiring it fresh.
Is there something I missed that I should check out?
Could it possibly be a bad socked in one of the lights? I do have a gut feeling it may be the passenger front turn signal. That one I have to play with it to get it right.
Any help is much appreciated!
Problem: Hazards do not work. Left turn signal works with and without the headlights on. But, when I DO turn the lights on. The right turn signal stays on.
Also, if I use the right signal. It doesn't show the blinking hazard lights, but all the turn signals outside the cab blink.
Solutions I've tried:
- Replaced all the bulbs, found some bad grounds, cleaned 'em up. That's how the left side started working.
- Replaced the fuse and blinker ( That round cylinder thingie. )
- Replaced the Multi-function Turn signal/hazard thing in the steering column and cleaned up the wiring there as well.
- Cleaned up the two connections for the tail-lights underneath the truck.
From what I can see, there doesn't seem to be any problem with the wires. But, I was considering hacking them all our and wiring it fresh.
Is there something I missed that I should check out?
Could it possibly be a bad socked in one of the lights? I do have a gut feeling it may be the passenger front turn signal. That one I have to play with it to get it right.
Any help is much appreciated!
Last edited by 1986Ford4.9; 11-15-2015 at 10:45 AM.
