rewiring oxygen sensor
05-11-2016, 08:54 AM
#1
Junior Member
Thread Starter
Join Date: May 2016
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
rewiring oxygen sensor
I am new to this forum. My dad and I have removed my locked up 5.4L engine and installed a new one from Ford over the past 2 weeks. It is back together and running.
When we were removing the engine we forgot to unplug the front oxygen sensors. So as the engine came out, the wires got pulled out of the connector on the engine harness side. I bought 2 new BWD o2 sensor connectors at orielys, but now cant find out whicch wires go to which wires.
On the drivers side there are the following colored wires coming from the harness gray/red, yellow/green, red/black, yellow/red.
on the passenger side the colored wires are gray/red, green/red, green, yellow/red.
the new connector wire is pink, black, black/white, black. Any help is appreciated.
David
When we were removing the engine we forgot to unplug the front oxygen sensors. So as the engine came out, the wires got pulled out of the connector on the engine harness side. I bought 2 new BWD o2 sensor connectors at orielys, but now cant find out whicch wires go to which wires.
On the drivers side there are the following colored wires coming from the harness gray/red, yellow/green, red/black, yellow/red.
on the passenger side the colored wires are gray/red, green/red, green, yellow/red.
the new connector wire is pink, black, black/white, black. Any help is appreciated.
David
