Noise from integrated wheel ends
#1
Senior Member
Thread Starter
Noise from integrated wheel ends
My truck has occasional noise from integrated wheel ends. this started after shop installed my Fox coilovers. truck is a 2014 lariat 3.5 screw. By turning the dial from 4x2 to 4 auto noise goes away then can return to 4x2 with no noise. Has been at the dealer twice for this with no remedy so far. Im looking for ideas here. Thanks
#2
Senior Member
Most likely the IWE control solenoid is failing, or you developed a vacuum leak in the system. Maybe one of the hoses got torn,pinched etc. when installing the coilovers?
Most often its the solenoid.
Most often its the solenoid.