Topic Sponsor
Maintenance Shop Keep your Ford F150 truck running strong. Discuss all things maintenance here.

Need new compressor help?

Old 02-04-2016, 06:46 PM
  #1  
Member
Thread Starter
 
fball1208's Avatar
 
Join Date: Mar 2009
Posts: 95
Received 5 Likes on 3 Posts

Default Need new compressor help?

I am in the market for a new compressor. My little craftsman doesn't work for what I need anymore. It's about good to full tires that's it. Looking. For a reasonably priced unit that will run impact,ratchet and light use of grinder. What's your alms suggestion? Don't have a ton of $ and limited to 120volt right now until I get my electric updated in the house can't add 220
Old 02-06-2016, 02:24 AM
  #2  
Member

 
RLXXI's Avatar
 
Join Date: Feb 2013
Location: Big Easy
Posts: 26,680
Received 6,199 Likes on 4,672 Posts

Default

Originally Posted by fball1208
I am in the market for a new compressor. My little craftsman doesn't work for what I need anymore. It's about good to full tires that's it. Looking. For a reasonably priced unit that will run impact,ratchet and light use of grinder. What's your alms suggestion? Don't have a ton of $ and limited to 120volt right now until I get my electric updated in the house can't add 220
You don't have an electric clothes drier? I do so I wired up another pigtail for my compressor, just plug it in when needed.

Your not going to get much of any kind of compressor for air tools that runs on 110, that much is certain. I use a Quincy compressor due to reputation and being built in the U.S. as well as [cfm specs (the most important factor)]. Sure it cost a little more but I'll never need anything again in my lifetime. Harbor Freight sells a Quincy clone for a couple hundred less but can't vouch for how well it will hold up.





Here's where I got it, newer model on the link but same ratings.
http://www.aircompressorsdirect.com/...D9qRoCPhPw_wcB
.
Old 02-06-2016, 07:09 AM
  #3  
Member
Thread Starter
 
fball1208's Avatar
 
Join Date: Mar 2009
Posts: 95
Received 5 Likes on 3 Posts

Default

Yea i do but unfortunately its in my basement and my garage is semi detached and i cant run an extension out ot it.
Old 02-06-2016, 10:14 AM
  #4  
Member

 
RLXXI's Avatar
 
Join Date: Feb 2013
Location: Big Easy
Posts: 26,680
Received 6,199 Likes on 4,672 Posts

Default

Put the comp in the basement and pipe the air where you need it with pvc, last shop I worked at had it set up that way. The pipe will give you a little extra volume to boot.
.
Old 02-06-2016, 10:34 AM
  #5  
Mark
iTrader: (1)
 
techrep's Avatar
 
Join Date: Jan 2009
Location: Va. Beach, VA.
Posts: 36,848
Received 2,410 Likes on 2,111 Posts

Default

my 33 gallon Craftsman has pleanty of power to run all my air tools and is 110 volts.
Old 02-06-2016, 12:58 PM
  #6  
Member
Thread Starter
 
fball1208's Avatar
 
Join Date: Mar 2009
Posts: 95
Received 5 Likes on 3 Posts

Default

Hmm never thought of running the pipe, may look into that. Have to look into the craftsman too, was thinking of the porter gable at tractor supply
Old 02-06-2016, 04:58 PM
  #7  
Senior Member
 
chickenwire's Avatar
 
Join Date: Oct 2014
Location: SW Michigan
Posts: 969
Received 171 Likes on 129 Posts
Default

rnl's quincy is a good compressor. And as he stated, pay attention to the cfm rating - it is the important thing.

I bought an Ingersoll Rand Garagemate that runs on 110 but it is not "reasonably" priced. It's not missed a beat in about 7 years now. Was a bit of overkill but I had a Craftsman from my dad that die, another Craftsman I bought that died (after about 10 years) and I thought I'd get something that will outlast me. (I hope!)


Thread Tools
Search this Thread
Quick Reply: Need new compressor help?



All times are GMT -4. The time now is 08:25 PM.