Mlps
06-17-2015, 08:58 PM
#1
Mlps
Can someone help m with this, I am installing a new trans in my 93 F150, it is a E4OD and I am not quite sure how to adjust or set the MLPS to the correct setting position, ay help or ideas will be greatly appreciated. Thanks in advance: John
06-18-2015, 06:30 PM
#2
Put the transmission in neutral, look at the mlps where it goes onto the shaft, you will see a line on either side of the hole, make sure they stay in line with the lines on the mlps body and tighten the screws.
They make a special tool so it's perfectly aligned but you don't really need it, just BE SURE it's in neutral.
They make a special tool so it's perfectly aligned but you don't really need it, just BE SURE it's in neutral.
06-22-2015, 06:26 PM
#4
Welcome.