mikyv2104

Hello everyone,
Can anyone tell me where I can find what the scan tool live data numbers should be? My focus is on the Maf reading, but would like to compare other numbers. I have an 04 f150 fx4 5.4 3v. Currently my reading is 0.01 lbs/s not in gear and 0.02 in gear and no higher than 0.05 while driving. Im not sure if this is normal. Its showing no codes. I cleaned it last night hoping to fix a slight shutter at idle.

fordmech604

Sensors/Inputs

PCM Pin/PID only

Measured/PID Values

Units Measured/PID


KOEO

Hot Idle

30 MPH

55 MPH

ACCS B19 VBAT VBAT VBAT BATT DCV
APP1 B25 4.0 4.0 3.4-4.0 2.9-4.0 DCV
APP2 B26 1.5 1.5 1.5-1.9 1.5-2.4 DCV
APP3 B27 .9 .9 .9-1.3 .9-1.8 DCV
4WDMCS B32 9.5 (2HIGH) 4.5 (4LOW) 6.6(4HIGH) 9.5 (2HIGH) DCV
MAF V B41 0 .7 1.2-1.5 1.9-2.3 DCV
IAT B43 1.7-3.5/120-50 (K) 1.7-3.5/120-50 (K) 1.7-3.5/120-50 (K) 1.7-3.5/120-50 (K) DCV/DEG
FTP V B44 2.6 2.6 2.6 2.6 DCV
TCS B45 .01/OFF VBAT/ON(G) .01/OFF .01/OFF DCV/OFF-ON
BPP B46 .1/OFF VBAT/ON (E) .1/OFF .1/OFF DCV/OFF-ON
BPS B47 VBAT/OFF .1/ON(E) VBAT/OFF VBAT/OFF DCV/OFF-ON
FEPS B55 .1 .1 .1 .1 DCV
SCCS B56 4.7 0-4.3 OFF-ON (Q) 4.7 4.7 DCV
OSS T14 0 0 445-505/

1400-1500 810-960/

2660 Hz/RPM
TR1 T17 0 0 VBAT VBAT DCV