front 2wd spindle broke
04-18-2015, 11:48 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
front 2wd spindle broke
hello,
while setting the bearing on my front spindle, following the procedure (torque while spinning rotor, loosen, torque again while spinning etc..) my spindle nut stripped the threading on my spindle... and of course the nut. not sure if this is due to me re-using the "one time use" nut or what (no nuts in stock in my city so i would have had to wait 3 days..).
TL;DR-
i need a replacement front driver side spindle and for the life of me can not find one.
while setting the bearing on my front spindle, following the procedure (torque while spinning rotor, loosen, torque again while spinning etc..) my spindle nut stripped the threading on my spindle... and of course the nut. not sure if this is due to me re-using the "one time use" nut or what (no nuts in stock in my city so i would have had to wait 3 days..).
TL;DR-
i need a replacement front driver side spindle and for the life of me can not find one.
