flstc

A looked around on here and many said it was a resistor behind glove box. Well if it's there, I can't find it. I looked under the dash until I was dizzy, no luck. Any other directions or suggestions?

Triton54HD

pull down your glove box, look straight ahead and its there. has a connector and two screws. also would be helpful to know the specs of your truck.

chickenwire

Yes, most blowers are set up through a resistor for the slower speeds and bypass it entirely for "high" - that's why high is the only speed that would work.

nrivera04

The red arrow is pointing right to it. May have some bulging and possibly a burnt smell. About $20 to boot

flstc

Want to say thank you for all the help. I replaced the resistor and all is working.

Thanks,

chickenwire

Cool. Thanks for confirming back to the thread.

catnhat

iTrader: (1)

I have the same problem. Mine has the HVAC controls through the Nav Screen though. I would believe the solution is the same but can someone confirm? I have 2009 Platinum. Stuck on level 4 blower speed.

TIA