Topic Sponsor
Maintenance Shop Keep your Ford F150 truck running strong. Discuss all things maintenance here.

Codes on a '93

Thread Tools
 
Search this Thread
 
Old 02-18-2009, 06:59 PM
  #11  
Senior Member
 
Good old Bill's Avatar
 
Join Date: Feb 2008
Location: Henderson, NV.
Posts: 4,658
Likes: 0
Received 27 Likes on 25 Posts

Default

Go figure!
Old 05-03-2016, 02:18 PM
  #12  
Junior Member
 
candyspaw's Avatar
 
Join Date: Oct 2013
Posts: 18
Likes: 0
Received 2 Likes on 2 Posts
Smile Push in clutch during koeo test

I think this is the one I get when I forget to push in the clutch during koeo test. If your auto trans is in neutral, I think you'll get it also. candyspaw
Old 05-03-2016, 02:25 PM
  #13  
Junior Member
 
candyspaw's Avatar
 
Join Date: Oct 2013
Posts: 18
Likes: 0
Received 2 Likes on 2 Posts
Default code reader

I got an Innova code reader for Ford OBD1 that spells out the code instead of flashing. All that counting gives me a headache. Get the extension cord and you can do your tests in the drivers seat. Got it on Amazon. candyspaw
Old 05-03-2016, 02:34 PM
  #14  
Junior Member
 
candyspaw's Avatar
 
Join Date: Oct 2013
Posts: 18
Likes: 0
Received 2 Likes on 2 Posts
Default stumbling when warmed up

I had this and one thing I found was sticky injectors and another was a defective engine temperature sensor. I also found that my ignition coil was internally shorting to ground. The truck would stumble when it rained, but I couldn't see arcing under he hood in the dark. Went away with a new coil.
Old 05-03-2016, 07:18 PM
  #15  
Senior Member
 
fordmech604's Avatar
 
Join Date: Apr 2014
Location: Texas City
Posts: 112
Received 21 Likes on 20 Posts
Default

179, Right or Rear Lean limit reached.
Sounds like you might have dirty injectors.

Possible Causes:
◾Fuel pressure
◾Fuel injector
◾Air intake
◾MAP sensor
◾Fuel injector electrical circuit
◾Fuel filter
◾Vacuum
◾Air filter

Last edited by fordmech604; 05-03-2016 at 07:24 PM.



Quick Reply: Codes on a '93



All times are GMT -4. The time now is 09:31 PM.