Topic Sponsor
Maintenance Shop Keep your Ford F150 truck running strong. Discuss all things maintenance here.

another " crank but no start" victim

Thread Tools
 
Search this Thread
 
Old 06-24-2015, 08:42 AM
  #1  
Junior Member
Thread Starter
 
deepwaterdriller's Avatar
 
Join Date: Jun 2015
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default another " crank but no start" victim

First post but, a long time lurker


Here is my problem 2010 F150 110000 miles no issues at all until


about 6 weeks ago I crank my truck but all it does is turn over, my first thought was fuel pump, towed it to local shop, checked fuel pressure and it did not register any, changed out fuel pump and truck ran fine for about 2 weeks then same issue, cranks but not starting, well after reading a few post on here I changed out the fuel pump relay under bed of truck... again, truck ran fine but, now the same problem...


turns over fine but does not start, it is frustrating because it happens intermittently and shows no faults when I plug it up. it may go a week with no issues then all of a sudden it does not start but after several attempts it starts like nothing ever happened...


any suggestions other than getting a match and gas to it?
Old 06-24-2015, 09:01 AM
  #2  
LightningRod
 
F150Torqued's Avatar
 
Join Date: Jan 2014
Location: San Antonio Texas
Posts: 2,412
Received 643 Likes on 514 Posts

Default

Flakey, intermittent Crankshaft Position Sensor or its circuit wiring? The PCM can't establish ignition timing or valve timing retard, RPM or a bunch of other stuff without it. Though I would have thought it would set a code.


-------------edit


Although searching MERGED: DTC List on www.F150Online.com site forum, the only DTC's that come up searching for "Crankshaft" and "CPS" are:


P0016 Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A
P0018 Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A


P0315 Crankshaft Position System Variation Not Learned.

Last edited by F150Torqued; 06-24-2015 at 09:16 AM. Reason: added DTC research comment
Old 07-02-2015, 10:10 AM
  #3  
Junior Member
Thread Starter
 
deepwaterdriller's Avatar
 
Join Date: Jun 2015
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Well, I couldn't fix the truck so............ I replaced it
Attached Thumbnails another " crank but no start" victim-f2501.jpg  
Attached Images  
Old 07-02-2015, 11:11 AM
  #4  
Mark
iTrader: (1)
 
techrep's Avatar
 
Join Date: Jan 2009
Location: Va. Beach, VA.
Posts: 36,870
Received 2,417 Likes on 2,118 Posts

Default

Hell yeah...
Old 07-02-2015, 12:20 PM
  #5  
LightningRod
 
F150Torqued's Avatar
 
Join Date: Jan 2014
Location: San Antonio Texas
Posts: 2,412
Received 643 Likes on 514 Posts

Default

Replace EVERYTHING connected to the Radiator Cap! Embarrassing but I have to admit, that's one solution that completely escaped me. Congrats' on the FIX.



Quick Reply: another " crank but no start" victim



All times are GMT -4. The time now is 06:16 PM.