94302F150

I have a 94 F150 5.0 with dual tanks that cranks but will not start. It has a new fuel filter, plugs, cap and rotor. I'm getting spark to the plugs and fuel pressure at the rail, pressure reading on the gauge is 35lbs with the key on and engine off, pressure is the same on both tanks. I have tested the injectors with a noid tester and they are not pulsing, but there is power to the injectors. I have tried two other ecm's and icm's with the same results. The last thing done today was to clean all grounds and battery cables. I have checked all power points and grounds to the ecm and everything looks and tested good. Is there anything else that I should look for or test, what would keep the injectors from firing?

94302F150

Problem solved..............just in case anyone wants to know, it turned out to be a bad tps sensor