SSGT_B

Does anyone have the manual or guide on how to change the passenger side motor mount on an 07 F150, 5.4 4X4? From guessing I need to drop the Y-pipe, manifold, AC compressor? Any help is much appreciated.

Thank you

RobertP

If it were me I done a 2wd while I had the manifold off, I'd pull manifold and it will come out thru fender ware, that's what I'd do, I don't see it coming out other wise but I could be wrong, I've done a lot with 04-08 trucks, your other option is to pull cab and lift motor as I couldant get the motor but so high as it was hitting firewall

SSGT_B

Cab is not an option for me. Might just have to pull the manifold. Guess I will order some exhaust studs before hand. Thanks for the response.

RobertP

Yea pull manifold and jack up motor

SSGT_B

Well I started this today. The manifold does NOT need to come off. I learned this after I already started taking it off. The starter was a PITA. I did have to remove the AC compressor from the block and push it out of the way to get to the mounting bolts. Ill finish up tomorrow. Here is the old MM

SSGT_B

Got it back together today. Squeaking is gone.