Topic Sponsor
Maintenance Shop Keep your Ford F150 truck running strong. Discuss all things maintenance here.

2008 f-150 U Joints and greasing.

Old 11-03-2014, 12:50 PM
  #1  
Junior Member
Thread Starter
 
Ryan Brown's Avatar
 
Join Date: Nov 2014
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default 2008 f-150 U Joints and greasing.

Hey guys, I have a 2008 f-150 that is screeching when driving slow. I have come to the conclusion that it is the U Joints. Does anyone know if the 2008 has a grease fitting so i can grease them? If so, what kind of grease?
I would also like to see what else i should be greasing while i am down there. Basically i want to do some preventative greasing and maintenance and what not.
Thanks!

2008 f-150 XL
80,000 miles
Old 11-03-2014, 01:39 PM
  #2  
Chive So Hard
 
KCCOFox's Avatar
 
Join Date: Jan 2014
Location: North Coast, Ohio
Posts: 1,417
Received 84 Likes on 77 Posts
Default

While I am not completely sure about the 08's, I do know that my 06 did not have grease fittings for my u joints. I just replaced the front and rear joint along the drive shaft. I wanna say they are 331 and you can get good ones from NAPA for $17
Old 11-04-2014, 06:10 AM
  #3  
Mark
iTrader: (1)
 
techrep's Avatar
 
Join Date: Jan 2009
Location: Va. Beach, VA.
Posts: 36,850
Received 2,410 Likes on 2,111 Posts

Default

The U-joints on the 04-08 F-150 are un-serviceable...take your drive shaft to a drive line shop and they can replace the current U-joints with serviceable ones. or buy a new drive shaft..
Old 11-07-2014, 08:50 AM
  #4  
Senior Member
 
Marc D's Avatar
 
Join Date: Mar 2013
Location: Fullerton, CA
Posts: 2,106
Received 234 Likes on 229 Posts
Default

Long gone are the days of grease joints on our trucks. The service life of ball joints, tie rod ends and most suspension parts is 100K miles without any grease added.
I would look at the small e-brake shoes in the rear drums that are a part of the back rotors. They are often overlooked and worn out springs and shoes can cause a screeching at low speeds. Good luck
Old 11-07-2014, 10:41 AM
  #5  
Chive So Hard
 
KCCOFox's Avatar
 
Join Date: Jan 2014
Location: North Coast, Ohio
Posts: 1,417
Received 84 Likes on 77 Posts
Default

[MENTION=13845]techrep[/MENTION], if OP has a good workbench to put the driveshaft ona dn some decnet mechanical know how, he could do it himself and save a boat load of money.
Old 11-07-2014, 12:07 PM
  #6  
Mark
iTrader: (1)
 
techrep's Avatar
 
Join Date: Jan 2009
Location: Va. Beach, VA.
Posts: 36,850
Received 2,410 Likes on 2,111 Posts

Default

agree... its not easy to un-stake them and remove..depends on his ability... I have a driveline shop here that will do it for $150


Thread Tools
Search this Thread
Quick Reply: 2008 f-150 U Joints and greasing.



All times are GMT -4. The time now is 09:43 PM.