1998 F250 LD Front steering and suspension rebuild
#1
1998 F250 LD Front steering and suspension rebuild
On my 98 f250 light duty 4x4 I think it is finally time to rebuild the front end 151000 mile on it and 15000 if it being with the 6 inch lift and 37s has wore it down.
What brand do you guys suggest? And is there anything I'm forgetting
It needs:
Passenger cv shaft
Upper and lower control arms with ball joints
inner and outer tie rod ends
pitman and idler arms
Center link
Wheel bearings both sides
brakes both sides
U joints front and rear
Already has:
New bilstein shocks
drivers side cv shaft
steering stabilizer
What brand do you guys suggest? And is there anything I'm forgetting
It needs:
Passenger cv shaft
Upper and lower control arms with ball joints
inner and outer tie rod ends
pitman and idler arms
Center link
Wheel bearings both sides
brakes both sides
U joints front and rear
Already has:
New bilstein shocks
drivers side cv shaft
steering stabilizer
#2
Senior Member
I prefer moog from rockauto.com. They may have more than one level of quality, I go for the best. I've had to do repeats with some other brands.
I used power stop front and rear pads (Z36) stopped better. I have '99 F250 ld.
I used power stop front and rear pads (Z36) stopped better. I have '99 F250 ld.
Last edited by raisin; 05-19-2016 at 06:29 PM.
#3