1983 ford f150 xlt lariat
#1
1983 ford f150 xlt lariat
my truck wont start it all started when i put new plug wires in an new cap...it spits through the carburetor after that i pulled all the plug wires pulled the number 1 plug and turned the motor till the piston was at the top and both of the valves were closed(top dead center i think) so i started lookin at the rest of the motor i also noticed that the carburetor butterfly is open ..wont shut ..wont move atall sooo thats locked...would a defective carburator make the truck not start and just spit through though it...it sounded to me like it was out of time btw stats are 351w .283 cam 4 barrel eldebrock carb ....
#5
Oh, and if the carb butterfly is STUCK WIDE open, I really dont think you will WANT it to start till you get THAT fixed! Full throttle startup AINT COOL!
#6
no i am 100% sure that the wires have been installed correctly...yes i got a new dis cap an button...ok cool thanks ill get the butterfly fixed...secondly how will i be sure if im on top dead?
#7
Pull the No#1 Plug rotate the eng slowly till compression builds in #1 Cyl. (put your finger in the spark plug hole and when it blows out, you are NEAR TDC! Look at the TIMING mark on the Harmonic Balancer and put the timing mark to "0" THAT is TDC! Make sure that the ROTOR in the distributtor is pointing to the #1 Cyl. spark plug wire. You should be good!
Trending Topics
#9
well its a eldebrock 4 barrel on it...have not had alot of experience with that type butterfly is at the front of the carb back 4 barrels are open...hey thanks wildwest...ill do that ...waiting for it to stop raining so i can get to work on it...just making sure this is done right btw,,,with the oversized cam in it,,,will it effect the location of the timing mark?