Exhaust before rear-wheel
#1
Exhaust before rear-wheel
I have a 2010 xtl 5.4 and my exhaust is cut with a flowmaster 40 series. Does any have pic of exhaust befor the rear-wheel? Any pic? I want to do it on both side but the gas tank is stopping me.
#2
Senior Member
You won't be able to do it on both sides unless it goes under the gas tank. But that's bad because of the heat from the exhaust that close to all that gas.
You could run the exhaust back up towards the engine following the headers back to the drivers side then run it back down on the outside of the frame to where you want.
To me one way is too much work, and the other is dangerous, but if you do it throw up pics
You could run the exhaust back up towards the engine following the headers back to the drivers side then run it back down on the outside of the frame to where you want.
To me one way is too much work, and the other is dangerous, but if you do it throw up pics
The following users liked this post:
JVC916 (05-21-2015)
The following users liked this post:
JVC916 (05-21-2015)
#7
Senior Member
Putting exhaust out the drivers side is going to be a issue because as you said the fuel tank is in the way. Its the same reason why the Lightning only had the exhaust on the passenger side.
Wayne
Wayne
Trending Topics
#8
Exhaust before rear-wheel
It can be done you have to reposition the fuel filter and return line no cutting just move is all you have to do go between the frame and front of the cab then it goes between the frame and body