JVC916

I have a 2010 xtl 5.4 and my exhaust is cut with a flowmaster 40 series. Does any have pic of exhaust befor the rear-wheel? Any pic? I want to do it on both side but the gas tank is stopping me.

JJ f150harley

You won't be able to do it on both sides unless it goes under the gas tank. But that's bad because of the heat from the exhaust that close to all that gas.

You could run the exhaust back up towards the engine following the headers back to the drivers side then run it back down on the outside of the frame to where you want.

To me one way is too much work, and the other is dangerous, but if you do it throw up pics

John316

Take a look at the Saleen F150 with the side exit exhausts. They have it routed down the sides, but the side skirts hide it.

kfm1989

Something like this

JVC916

yea that looks nice.. Do you have them on both sides??

kfm1989

unfortunately not like you said the gas tank is in the way

Z7What

Putting exhaust out the drivers side is going to be a issue because as you said the fuel tank is in the way. Its the same reason why the Lightning only had the exhaust on the passenger side.

Wayne

1lohauler

It can be done you have to reposition the fuel filter and return line no cutting just move is all you have to do go between the frame and front of the cab then it goes between the frame and body

1lohauler

here is what it looks like going through the bed on both sides with 3" tips

JTRATX

THat looks awesome! Does it rattle inside the holes?