3 mode light bar. ? For harness/switch
05-20-2015, 04:28 AM
#1
Senior Member
Thread Starter
3 mode light bar. ? For harness/switch
Do I need a special switch or harness to operate the 3 mode light in order to utilize all 3 modes . Spot , flood , combo . ???
05-20-2015, 10:38 PM
#2
depending on the brand, all the ones I've seen you don't get to choose. the flood/spot operate at the same time to give you the all around coverage. i could be wrong. good luck
06-06-2015, 10:59 PM
#3
Senior Member
Thread Starter
Yep, got the light in. Unlike most it has 3 wires. I have them all connected and have just one mode spot:flood. I'll probably add another switch .
07-30-2015, 09:10 AM
#4
Sounds like you have one pos. wire for spot, one pos. wire for flood, and a common ground.
If it were me, I'd use two simple switches, one for flood one for spot. turn them both on when you want both.
If it were me, I'd use two simple switches, one for flood one for spot. turn them both on when you want both.
