When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Custom Fabrication DepartmentThis is the section to discuss any and all custom work that you've done or had made that may not be available on the retail market.
Hey I would like to know if you think I could do this to my truck. I have an 07 market. It already has a center console shift with the rear vents. Would this be plug and play? Minus hooking up the new 110v outlet in the back? Or really what should I know. I'm extremely interested. I would buy the fiberglass molds you made as well if you think it would work
The shifter has been pretty far from plug/play so far for me, but that's because my search results have yielded only one or two others that have even attempted this project, haha! At the end I'll do a full write-up to let you know what you need, although I'm not planning on hooking up the rear outlets or air as of right now.
I'll need to take off a bit of the gloss on the adapter trim, but once i get my CTS Edge Evolution programmer I will be designing and installing a center portion to fill out the adapter center!
A little blurry, but she shifts perfectly and drives strong!
Also part of my project is blacking out the interior piece-by-piece. Not the dark grey parts, just the bland light grey ones. Since I had yet to re-attach the instrument cluster I decided to take out the rest of the panels as well and get them all looking beastly. Krylon Maxx Satin Black after a sand down with 800grit and a mineral spirits wipe-down! I added a strip of chrome to the instrument cluster well that I think really makes it pop!
This is awesome! Any finished photos? I have been looking at doing this conversion on my new 2015 XL with the jump seat. I think it would be a little bit easier for me to retrofit it as the dash panels are already pretty similar.
Thanks for all the support guys! I've been going through a very busy summer so this project took a back seat for a bit but next week I've cleared out 5 days straight to work exclusively on finishing it up!
Console and touchscreen stereo installed and hooked up! Everything works except I have to start the truck from neutral for some reason, but that's a small price to pay for this badass console setup!
Blacked out trim pieces, plus added a little chrome strip around the beveled edge surrounding the gauges.
Console and touchscreen stereo installed and hooked up! Everything works except I have to start the truck from neutral for some reason, but that's a small price to pay for this badass console setup! Blacked out trim pieces, plus added a little chrome strip around the beveled edge surrounding the gauges.
I'm a bit confused... Two shift **** one on the wheel and one for the console... I know that he added the console but did he make the non work on there or what's going on with that one?
06-13-2015, 10:32 AM
