Executioner408

sup guys i recenly have a 2013 mustang gt and will be gettng a 2015 f150 5.0 wanting to know if my ford racing 90mm tb will fit i know most parts dont fit but also will the headers fit? thanks in advance.

RobertP

I know the Whipple kit will making over 500 rwhp on octane message me for more info

DallasTXF150

Bigger diameter TB will be absolutely useless for you without forced induction. Especially the 90mm.

Save your money

Executioner408

I was asking cause I already have it taking it off my Mustang and seeing if any parts would be reused

Eaton

Not to hate on you, so please don't take it that way.

Is your intake manifold on the f150 90mm+? If not, than you won't increase flow; you can only flow as much air as the intake manifold bore size. Other than that, it should fit because the intake manifold's should be the same from Mustang to F150. The OEM tunes are the main differences. I hope this helps!

Executioner408

None taken boss I'm here for information so I don't mess up stuff lol I have an adapter to fit on the oem intake of my yote it's this part
http://www.americanmuscle.com/frpp-s...er-1112gt.html
http://www.americanmuscle.com/frpp-9...dy-1112gt.html

gDMJoe

1. As others have noted ... There would be no performance increase by simply adding a larger throttle body (even with a tune).
   .
2. the F-150's 5.0L is not the same as a Mustang GT 5.0L - cams, exhaust, ECM, etc., etc., etc.
   .
3. AND as per the 90mm throttle body listing ... "•Perfect for Force Inducted or Heavily Modified GT's". *None of which you have or indicate mod'ing to do.

.

jkenprice1

The main differee between Mustang tuning and F150 tuning is Mustangs are tuned for high rpm Horsepower and F150s are tuned for low end torque. I'm not going to try to explain the technical details. Leave the Mustang parts on the Mustang and buy a tunner for your truck.