maxxis

I've been reading lately this forum to get clarity about aftermarket wheel setups and don't see much info about offsets. I'm planning to go with 2'' level and 275/65R20 BFG KO2. Trying to find good rims - what would be correct rim specs to avoid rubbing? I also don't like when wheels stick out too much. I ordered 2016 Lariat 4x4 screw.

Size: 20x9
Bolt pattern: 6x135
Offset: ?

Thanks!

slova1966

I just put 20x9 +20 Fuel Mavericks on my truck with a 295/60/20 tire no rubbing at all. I prob could have went with a +14 but don't know for sure.

maxxis

I like your rims a lot! Awesome. And my truck will also be white (tri-coat).

DWSmoot

Looks great!

2.7Ecoboost

That looks great congrats. I have been leaning towards the +14.

OMAC

Go +20 I just picked up +1 Mavericks and they stick out and fling mud everywhere, I had to install mudflaps, with 275/60/20 I have rubbing in reverse on a mudflaps so still lots of room minus flaps

maxxis

Thank you, will go with +20 Fuel wheels.

schlotzj

Hey love the setup on your wheels/tires! I'm looking at putting a set of Anza D558 wheels on my 2015 Lariat FX4, but can't decide if I should do a +1 or +22...does your tires sit flush with the farthest point of the fender? Could you please send me a picture of a distant view from the front or back showing how far out the tires come? If you could please also show how much space is between the UCA and tire? No rubbing or trimming? Thanks in advance for all your help!

Toovey2v

Careful, I rubbed hard on the front crash bars, and at full lock on the rears, but my tires are 34.6x12.8, wheels are 18x9 +18 offset.

Toovey2v

My +18s with my tires sit flush, straight up from the hub of the wheels on my fenders is exactly flush with my tread