Supreme Suspensions Leveling kit
#1
Member
Thread Starter
Supreme Suspensions Leveling kit
Has anyone installed one of these? Getting ready to do either the 3" Supreme Suspensions leveling kit or the rough country, needing some feedback. If I do a 3" level, should I be replacing the shocks too? Any input is appreciated.
Thanks all.
Thanks all.
#2
From my research 3" lift without a drop bracket kit (to lower the front axle assembly) would put all of your front suspension and driving components at severe angles. I've herd people have had good luck with the rancho quick lift 2.5" and after much research that is what I will most likely do due to what you get for your money vs a coilover system like fox or king or icon
The following users liked this post:
ffhunn (02-12-2017)
#3
I would maybe shy away from 3". If you are dead set on 3" up front, I think you may need to look at something more than a leveling kit. It would be hard on your front end.
The following users liked this post:
ffhunn (02-12-2017)
#4
Member
Thread Starter
That's kind of what I was thinking, that the 3" would really Theo things for a loop. I think it is listed as a 3 but is really a 2.5" kit. Doing more research as we go. Thanks!
#5
Senior Member
I'm running their 2.5 and am very happy. Front is exactly even with the rear. Have about 10k miles on it and it's been perfect.
The following users liked this post:
ffhunn (02-15-2017)