Skull Caps
#2
F250>F150
iTrader: (2)
I bought a set of PTM caps, but there was someone on here recently that did this. I think he painted from the textured black to white. Used duplicolor and a gloss maybe?
I also saw someone accomplish this is the "Member's Build Section". I believe he sanded, primer, sanded, primer, sanded, painted. They came out really well. Although almost anything is better than the textured plastic.
I also saw someone accomplish this is the "Member's Build Section". I believe he sanded, primer, sanded, primer, sanded, painted. They came out really well. Although almost anything is better than the textured plastic.
#4
There was a link for a for sale painted skull mirror cap that someone provided while ago. Anyone have this link?
Thanks guys
Thanks guys
#5
Junior Member
#7
I'm thinking about it, but I can't decide whether I should match them race red or swap for chrome ones, since there's already a LOT of red on my truck.
If I was to do it, I'd sand, shoot some adhesion promoter, high build primer, sand, high build primer, sand, and then spray with a factory match aerosol can. Usually can be had pretty cheap, my local place can give me a spray can of factory match paint for about $20 or so.
If I was to do it, I'd sand, shoot some adhesion promoter, high build primer, sand, high build primer, sand, and then spray with a factory match aerosol can. Usually can be had pretty cheap, my local place can give me a spray can of factory match paint for about $20 or so.
Last edited by jcat; 09-29-2015 at 09:24 AM.
Trending Topics
#8
Found the link...
$228 kinda pricy?
http://www.ebay.com/ulk/itm/251965872591
Theres also chrome for $43 some.... But not feeling the krome
$228 kinda pricy?
http://www.ebay.com/ulk/itm/251965872591
Theres also chrome for $43 some.... But not feeling the krome