Retrofit Power Fold Tow Mirrors to XLT
#501
Senior Member
do you have the "basic" ( xlt ) mirror wiring diagram, i see the ones you shared are "premium" (lariat+ power fold extend ect )
Last edited by cwcb08; 12-20-2016 at 11:53 AM.
#503
Senior Member
How many mirror diagrams do they have?
Do they make mirrors with signals and power adjust but no auto dim?
That's almost what I have minus the drivers side auto dim
Do they make mirrors with signals and power adjust but no auto dim?
That's almost what I have minus the drivers side auto dim
Last edited by cwcb08; 12-20-2016 at 01:27 PM.
#504
The wiring diagrams are only broken down into 8 pin (Base) or 22 pin (Premium) mirrors. You will have to determine which features your individual mirrors have. Here are all the rest of the wiring diagrams - there ain't no more...
#506
Senior Member
thank you again
I'm still not sure where this guy is finding the 3rd pin (must be on the led signals themselves?)
https://www.f150forum.com/f118/anyon...5/#post5086942
I'm still not sure where this guy is finding the 3rd pin (must be on the led signals themselves?)
https://www.f150forum.com/f118/anyon...5/#post5086942
Last edited by cwcb08; 12-20-2016 at 01:46 PM.
#507
thank you again
I'm still not sure where this guy is finding the 3rd pin (must be on the led signals themselves?)
https://www.f150forum.com/f118/anyon...5/#post5086942
I'm still not sure where this guy is finding the 3rd pin (must be on the led signals themselves?)
https://www.f150forum.com/f118/anyon...5/#post5086942
Let me know if I can be of any further assistance.
#508
Senior Member
Well dang it. My brother just bought a 17 F250 and is rubbing his fancy mirrors in my face... Guess I need to look back into doing this! Thanks for keeping this thread going!
#509
Senior Member
Got all my parts in and looking to do this sometime this weekend (Christmas present to my truck). Want to make sure I get all my ducks in a row before I start.
1.) What is the best way to disconnect the door harness from the cab? Is there any trick to it?
2.) Can I install the new window switch, spot light switch and module before I swap the mirrors and everything else to get a head start? Or will that cause problems?
3.) For those that have done this already, what should I look out for? Any issues come up that you wish you had known before-hand or would serve as good pointers for anybody else?
Thanks!
1.) What is the best way to disconnect the door harness from the cab? Is there any trick to it?
2.) Can I install the new window switch, spot light switch and module before I swap the mirrors and everything else to get a head start? Or will that cause problems?
3.) For those that have done this already, what should I look out for? Any issues come up that you wish you had known before-hand or would serve as good pointers for anybody else?
Thanks!
#510
Take a few pics of how the harness is routed. U will have some extra plugs that don't go to anything so don't freak out, u didn't miss anything.
You can install the spot light module and switch before u do the mirrors. It should affect it.
You can install the spot light module and switch before u do the mirrors. It should affect it.
The following users liked this post:
bhamilton (12-21-2016)