Retrofit 2017 F-250 Aux Switch Panel in F-150
#22
I'm told from my dealer that this is the part number for the OH console with switches, but I have no idea what color and what configurations (roof, rear window, etc). I can't find anything with a google search, maybe someone else knows what to do with this number.
HC3Z-2851-9A58
Good luck
HC3Z-2851-9A58
Good luck
The following users liked this post:
Blade1899 (12-07-2016)
#23
Senior Member
iTrader: (1)
The overhead console is modular, meaning it comes apart and can be configured relatively easy. This is the part number on the panel...it should take you in different directions helping you to search for the one with the switches....if you are able to buy just that part....
The following users liked this post:
Blade1899 (12-07-2016)
#24
Senior Member
iTrader: (1)
I'm told from my dealer that this is the part number for the OH console with switches, but I have no idea what color and what configurations (roof, rear window, etc). I can't find anything with a google search, maybe someone else knows what to do with this number.
HC3Z-2851-9A58
Good luck
HC3Z-2851-9A58
Good luck
http://www.tascaparts.com/?p=catalog...HC3Z-2851-9A58
Use this part number WITH the vin from a vehicle (Raptor) that has this overhead and you will locate the correct one. This same overhead console can be found in the new 2017 Super Duty trucks as well....
#26
I think that we will be required all the assembly and not just the little grill piece...
If you look that the following picture;
You can see that the sensors on each side of the back window switch are not located at the same place, so the hole wont align...
If you look that the following picture;
You can see that the sensors on each side of the back window switch are not located at the same place, so the hole wont align...
The following users liked this post:
Blade1899 (12-07-2016)
#27
#29
My dealer, who gave me the part number above, said it would require the entire console to be replaced based on their research (using a 2017 Super Duty). They said they'd revisit this with me as soon as Ford released parts/diagrams for the Raptor.
The following users liked this post:
ajean (12-07-2016)
#30
Not sure you could properly "dremel" something for that...
But I'm all ears!