recon tailgate led bar
#1
recon tailgate led bar
I recently installed RECONS TAILGATE LIGHT BAR on my 2015 lariat. The bar automatically deactivates the blind spot system when plugged into the trailer lights connector. I am going to send this back if there it isn't a solution. did anybody else have this problem and is there a fix. Asked RECON but they never responded back.
#4
LED Light Bar and keep blind spot activated - BLIS
Solution
If you wire an LED light bar to the trailer harness, BLIS will be deactivated. You'll need to wire directly to your back lights. It's simple... The tail light wires you need are as follows:
Left tail light:
Left blinker is brown/green stripe
Tail light is blue/silver stripe
Reverse light is green/brown stripe
Right tail light:
Unfortunately, there are two wires same color. The right light is purple/pink stripe. To help you, it's in the same position as the left light wire on the left side.
Ground:
On either side, there are ground wires above the spare.
These instructions assume you know how to make the connections and you know which wires from the 4pin adapter are left, right, tail, and ground. If not, the internet won't let you down.
I have a 2016 F150 SCREW Platinum
If you wire an LED light bar to the trailer harness, BLIS will be deactivated. You'll need to wire directly to your back lights. It's simple... The tail light wires you need are as follows:
Left tail light:
Left blinker is brown/green stripe
Tail light is blue/silver stripe
Reverse light is green/brown stripe
Right tail light:
Unfortunately, there are two wires same color. The right light is purple/pink stripe. To help you, it's in the same position as the left light wire on the left side.
Ground:
On either side, there are ground wires above the spare.
These instructions assume you know how to make the connections and you know which wires from the 4pin adapter are left, right, tail, and ground. If not, the internet won't let you down.
I have a 2016 F150 SCREW Platinum
Last edited by cdj5489_2; 03-05-2016 at 08:03 PM.
#5
Senior Member
For a 16 with BLIS, all wires above are correct except left turn is a gray wire with brown stripe. Also, for right signal, it's the purple wire with pink stripe that's right next to the black wire with yellow stripe.
Trending Topics
#10
Originally Posted by cody51
whatever you do do not go to www.recon.com.