Morimoto switchback tail light accents.
#11
Senior Member
Sub
#12
Senior Member
Thread Starter
Running and reverse
Last edited by antho; 06-12-2016 at 07:43 PM.
#14
Senior Member
Looks sick. Write up? At least in the event they ever come back in stock
#16
Senior Member
Thread Starter
Have to dremel around the back of the tail light. Also have to drill a hole for the LED strip wiring to exit. Once in place I used a 2 part epoxy then a silicon. It's my first time doing it so it looks like crap where I put it back together.
#17
Senior Member
Thread Starter
Fed the LED wire thru this opening to get it to the tail light wiring .
For the wiring i had to inline splice 3 wires per tail light. The colors are the same on both sides.
These are wires from the switchback to brake light plug
Black to black w/ yellow stripe
White to blue w/ white stripe
This is the wire from switchback to reverse plug
Orange wire to green w/ purple stripe
For the wiring i had to inline splice 3 wires per tail light. The colors are the same on both sides.
These are wires from the switchback to brake light plug
Black to black w/ yellow stripe
White to blue w/ white stripe
This is the wire from switchback to reverse plug
Orange wire to green w/ purple stripe
Last edited by antho; 06-12-2016 at 10:01 PM.
#18
Did Charlie advise why he thought the product was not moving? Seems like it would be a hot item if it does what it says? Maybe the requirement of cutting open the assembly is turning people off???
Doug
Last edited by dougrkyle; 06-13-2016 at 01:04 PM.
#19
Would be no different from any other retrofit. I agree with you its sad that their not going to continue to offer. Hopefully its just a shortage in supply and we'll see it come back soon.
#20
He didn't elaborate much. Either they stopped carrying these due to lackluster sales or this was an experimental batch with no scheduled follow up. Hopefully that changes and more will be available for sale.