DWSmoot

It's actually probably 4" or 4.5".I am running a 4 inch lift kit my front spacer is 4 inches. I'm trying to get a rid of some of my rake and I was hoping yours was 4.5" and I can install those rather than lowering the back.

srg963

Install instructions state Shock Spacer, 4.5"

DWSmoot

Thanks I saw that. If you happen to be around your truck with a tape measure, would be great if you could measure it. I know sometimes with these situations they may be quoting a lift height, although it says 4.5", but if not thanks for the response.

srg963

Looks like 4.5".

DWSmoot

Thanks man!

srg963

Coming up on 24k, replaced air filters.





Made access to the cabin air filter much easier
https://www.f150forum.com/f118/diy-e...access-329680/



Replaced the trim piece I broke with the last cabin air filter change lol


And finally fixed my drivers door giggle blues.
https://www.f150forum.com/f118/diy-f...-blues-329676/



Busy weekend

danielbrown0003

Nice build and continuous updates. I plan to do the same updating with mine. I have enjoyed reading them along with some of the post. I just picked up my 2016 White Platinum FX4 about two weeks ago. The only difference is mine has 5.5 bed. I had the rear blocks pulled from mine before I took delivery. My wheels should be delivered today. I ordered Chrome PVD 22x9 Expedition Platinum wheels and will wrap them in 305/45R22 Toyo Proxes ST2s Saturday morning. Thank you for your post and keep us updated. Your truck is a good looking truck.

srg963

Got a question about the levelness of the truck after the lift.

The rear is just a hair higher than the front.


And a comparison shot next to a Crew Raptor.

berty

Your truck is beautiful! Great taste!

srg963

Upgraded the center speaker this weekend to a Polk DB 351. Used the factory clips for an easy install.