Hints, Tips and Tricks
#1171
Sometime I will try the settings under my advanced menu and toggle it off to see if that makes a difference. But normally I am not that patient to figure it out. Figured someone would pipe up and say they knew all about this and why was I the last one to figure it out.
The following users liked this post:
chief_bs (01-10-2017)
#1172
I drilled a hole in the little pin on the back of the seat, added a small key ring to it, and tied a piece of paracord from the key ring to the headrest bar.
Then made a gun rack that holds an AR15 hidden behind the seat using the factory seat bolts, some 1 in aluminum bar, and quick fist clamps.
Then made a gun rack that holds an AR15 hidden behind the seat using the factory seat bolts, some 1 in aluminum bar, and quick fist clamps.
#1173
Read though this thread. Great tips. Hopefully this hasn't been mentioned yet, but I know how miserable the 302a xlt guys are with their stereos. I have the Kicker powerstage sitting in my garage, but haven't had time to install it. In the mean time, I have figured out if you go into sound settings and switch the sound preference to driver and move treble up 2 clicks, leave mids in the middle and move bass to 1 below full. Makes at least a 25 percent improvement in volume and sound.
The following 2 users liked this post by rjp222:
08drenalin (06-17-2017),
srrmc (11-20-2017)
#1175
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,264 Likes
on
2,183 Posts
#1177
Not sure if this has been answered or not, but I was told that if the battery in your remote fob dies on a push to start truck it won't detect your fob. So in order to start your truck you place your fob in that little tray under the mat and it will be able to read the fob and start the truck
#1178
Senior Member
Not sure if this has been answered or not, but I was told that if the battery in your remote fob dies on a push to start truck it won't detect your fob. So in order to start your truck you place your fob in that little tray under the mat and it will be able to read the fob and start the truck
#1180
Senior Member