Rampy

Stopped by F150lifts this past Sat, but it was early & like I guessed nobody was home.....possibly next time we make it to town if it's not a funky hour....

HaloLifts

^ PM sent. We are not at the shop on Saturdays.

nix150

Thanks for the discussion, Alex [MENTION=156426]F150Lifts.com[/MENTION]. I'll ask this here, and maybe a new thread, but what do you think of a 295/60 (toyo at2) on a +1 offset 20x9 Fuel Maverick? Of course running my new Boss set-up...set at? I want ZERO rub. I'll leave that an open question... until some runs a "level" with a 0 offset?

HaloLifts

I can't possibly know every tire/wheel size, offsets/backsets what rubs and what doesn't, sorry. What I do know is you can get 3" of lift and run over to the tire/wheel shop and work out with the what the biggest tire you can put on with zero rubbing. Also know we were running 305-55-20's on stock FX4 wheels and we had zero rubbing and zero trimming.

DrFeltersnatch

so lets do a count. how many people that have posted in this thread have these on their trucks?

fox?
f150lifts?

nix150

Oh, I know...I'm just really looking for your thoughts on the size/offset combo as a professional in the industry. Would love to get some pics of your shop set-up! The 15s are still very new and everything is a bit of trial by fire effort.

HaloLifts

OP if we can be of any further help, just give us a call or email.

nix150

I certainly will! I'm looking forward to getting my setup installed! Again, thanks for all your help!

ranger22

Did you guys adjust the spring rate on the boss coilovers for the '15s or just carry over the same part from the '14s?

HaloLifts

Spring rate is the same, because the 2015 is some 700 lbs lighter we will set up the 2015's with slightly less preload on the spring.