FORScan - software to enable/disable features in your truck
08-03-2016, 02:33 PM
#1161
Senior Member
Anyone want to give this a shot:
- This is what enables the option on my 2014 Fusion, I don't own an F-150.
Compared ABD with it disabled and enabled to discover the BdyCM code change.
Windows Remote Open/Close:
BdyCM
726-17-01: 0101 0101 014A - Remote Close Enabled
726-17-02: 0101 0101 014B - Remote Open Enabled
Need to change the entire line... yours is probably all 0's which is disabled.
Enjoy!
- This is what enables the option on my 2014 Fusion, I don't own an F-150.
Compared ABD with it disabled and enabled to discover the BdyCM code change.
Windows Remote Open/Close:
BdyCM
726-17-01: 0101 0101 014A - Remote Close Enabled
726-17-02: 0101 0101 014B - Remote Open Enabled
Need to change the entire line... yours is probably all 0's which is disabled.
Enjoy!
08-03-2016, 02:35 PM
#1162
The Source
Also BdyCM may need to time out... wait 10 mins or do a BdyCM reset in the FORScan menu.
Opening the Windows
You can only open the windows for a short
time after you unlock your vehicle with the
remote control. After you unlock your
vehicle, press and hold the remote control
unlock button to open the windows and
vent the moonroof. Release the button
once movement starts. Press the lock or
unlock button to stop movement.
To close the windows and moonroof
Press and hold the remote control lock button.
Release the button once movement starts.
Press the lock or unlock button to stop
movement.
08-03-2016, 02:39 PM
#1164
The FORScan Guy
Thread Starter
08-03-2016, 02:44 PM
#1165
Senior Member
Are you trying the proper procedure?
Also BdyCM may need to time out... wait 10 mins or do a BdyCM reset in the FORScan menu.
Opening the Windows
You can only open the windows for a short
time after you unlock your vehicle with the
remote control. After you unlock your
vehicle, press and hold the remote control
unlock button to open the windows and
vent the moonroof. Release the button
once movement starts. Press the lock or
unlock button to stop movement.
To close the windows and moonroof
Press and hold the remote control lock button.
Release the button once movement starts.
Press the lock or unlock button to stop
movement.
Also BdyCM may need to time out... wait 10 mins or do a BdyCM reset in the FORScan menu.
Opening the Windows
You can only open the windows for a short
time after you unlock your vehicle with the
remote control. After you unlock your
vehicle, press and hold the remote control
unlock button to open the windows and
vent the moonroof. Release the button
once movement starts. Press the lock or
unlock button to stop movement.
To close the windows and moonroof
Press and hold the remote control lock button.
Release the button once movement starts.
Press the lock or unlock button to stop
movement.
08-03-2016, 03:37 PM
#1166
Senior Member
Ford's DRL Type Options:
This setting is required or any DRL changes in the IPC are irrelevant and will not do anything for those that are enabling them on a vehicle without them.
(I was PM'd asking about this)
BdyCM
726-50-01
(Your vehicle may not support all these options - FORScan will give an error if it doesn't when you try to write)
Disabled - 017F
Low Beams - 0280
Front Fog Lamps - 0482
Front Turn Lamps - 0886
Dedicated DRL - 108E
High Beams - 209E
Low Beams and Dedicated DRL - 40BE
-
This setting is required or any DRL changes in the IPC are irrelevant and will not do anything for those that are enabling them on a vehicle without them.
(I was PM'd asking about this)
BdyCM
726-50-01
(Your vehicle may not support all these options - FORScan will give an error if it doesn't when you try to write)
Disabled - 017F
Low Beams - 0280
Front Fog Lamps - 0482
Front Turn Lamps - 0886
Dedicated DRL - 108E
High Beams - 209E
Low Beams and Dedicated DRL - 40BE
-
08-03-2016, 03:45 PM
#1167
The Source
So if I understand the first sentence correctly, we (2015+ owners) will not be able to use these DRL settings because they are not an option in the IPC? 2015+ DRL is low beams only, which what my setting was in 726-50-01 0280. I tried some of the other settings and got an invalid configuration error. I have been trying to figure out a way to use park/turn lights as DRL for quite some time. In the 09-14 MY they can set it in the BCM at 726-11-01 and it shows as an option in the IPC for DRL's to be park lights or fogs. I got the settings from the 09-14 spreadsheet, but none of these worked on my 15. Hopefully maybe I did something wrong, and this could work on 2015+?
If FORScan is saying invalid value then your car cannot use those other DRL values due to software limitations or Ford design.
The following users liked this post:
carrierj (08-03-2016)
08-03-2016, 03:47 PM
#1168
The FORScan Guy
Thread Starter
So if I understand the first sentence correctly, we (2015+ owners) will not be able to use these DRL settings because they are not an option in the IPC? 2015+ DRL is low beams only, which what my setting was in 726-50-01 0280. I tried some of the other settings and got an invalid configuration error. I have been trying to figure out a way to use park/turn lights as DRL for quite some time. In the 09-14 MY they can set it in the BCM at 726-11-01 and it shows as an option in the IPC for DRL's to be park lights or fogs. I got the settings from the 09-14 spreadsheet, but none of these worked on my 15. Hopefully maybe I did something wrong, and this could work on 2015+?
Edit: I believe DanMc85 was addressing member Khislop007's situation where, because his 726-50-01 value was 017F (disabled) and because of that, even though Khislop007 had selected "daytime lights" in productivity screen settings, it still wasn't working.
Last edited by Livnitup; 08-03-2016 at 03:51 PM.
The following users liked this post:
carrierj (08-03-2016)
08-03-2016, 04:35 PM
#1169
The Source
You can't use settings from the the 09-14 spreadsheet; their addresses/values for things are different than ours. If you try to write the values DanMc85 posted for BCM 726-50-01 and FORScan won't write them and gives the invalid configuration error, then you can't do it.
Edit: I believe DanMc85 was addressing member Khislop007's situation where, because his 726-50-01 value was 017F (disabled) and because of that, even though Khislop007 had selected "daytime lights" in productivity screen settings, it still wasn't working.
Edit: I believe DanMc85 was addressing member Khislop007's situation where, because his 726-50-01 value was 017F (disabled) and because of that, even though Khislop007 had selected "daytime lights" in productivity screen settings, it still wasn't working.
08-03-2016, 05:31 PM
#1170
Wow, just got those the entire thread, that took awhile. Wondering if there is a setting that would allow Sync 3 v2.0 update.
The only VIN I know of that has it thus far:
Syclone Rob's 2016 F150 Lariat Sport 4x4 5.0L 3.73: 1FTEW1EF5GFC88449
The only VIN I know of that has it thus far:
Syclone Rob's 2016 F150 Lariat Sport 4x4 5.0L 3.73: 1FTEW1EF5GFC88449
