2015 Mytouch Lockpick Air installed
#41
Dip switch question?
How do you have your dip switches set?
I have 1 and 5 on, and I can't get the lockpick to work.
2015 F150 Lariat
When I select lockpick air my phone mirror flashes on the truck screen for a second but then screen goes back to normal radio mode?
Not sure what to do?
I have 1 and 5 on, and I can't get the lockpick to work.
2015 F150 Lariat
When I select lockpick air my phone mirror flashes on the truck screen for a second but then screen goes back to normal radio mode?
Not sure what to do?
#42
Senior Member
Thanks again for answering all these questions. I have one, with the factory 360 camera setup, what doesn't work. I read radio controls, but not sure what that all entails. I bet if you did a short youtube video, people would love you.. Haha. Thanks again.
The following users liked this post:
Livoniabob (07-28-2015)
#43
Senior Member
The following users liked this post:
coastdweller (07-30-2015)
#44
I've got the same problem. All the factory functions work, but the lockpick does not. I'll get a confirmation beep when I press the menu button on the remote, but that is all it will do. So far, this is working out to be a bad idea.
#45
2015 Mytouch Lockpick Air installed
This is all great information. Thanks for the constant updates. I hope that there is more functionality added in the future. If someone could build a device to integrate CarPlay and Android Auto that would be fantastic but I know this is as close as we can get currently.
Pandora looks nice. Will the screen interact with the application or is it just mirroring? It appeared to be full screen versus the mirroring in the other photos.
Thanks
Pandora looks nice. Will the screen interact with the application or is it just mirroring? It appeared to be full screen versus the mirroring in the other photos.
Thanks
#46
For all those looking to install one of these, you might want to wait until they get the bugs worked out of them. I now have tried 2 of them and they do not work at all. This is beyond frustrating.
#48
**EDIT**Camera Source is working with me to resolve the problem and stated that I'm the second one to call in with this issue. Kudos for trying to make it right.
Last edited by 1970crispy; 09-18-2015 at 11:20 AM. Reason: Updated info
#49
So, after trying unsuccessfully last night for hours to install the latest software for the lockpick, I found out by chance that the menu screen will come up only when the truck is in reverse and the rear factory camera is toggled off through the remote. Even then, it's only temporary as I get a message along with 3 beeps that says view right camera not connected that comes up every few seconds. I'm going to call tech support again and tell them what is going on, but I'm starting to think that maybe there was a half year change on this truck and this one is simply not compatible with the lockpick. My truck is a late 2015 and it's build date is 06/15 and the original posters truck was obviously built quite a bit before that. I'm hoping that there will be some resolve, but I don't have high hopes at this time.
#50
Senior Member
I have notice that camera source has not posted on here in a while they use to keep us updated with this product.
I guess it's a major fail.
I guess it's a major fail.