Spectre06

iTrader: (1)

No I only want to run the amber and I don't care if it blinks.

4B11TX

Just hook 12v up to the switch back wires and you are good to go. You can either hook them to the parking lights or add a separate switch.

Reapster

What temperature color is the white LED on these headlights roughly? I'm debating on whether 5K or 6K switchbacks will match the color better.

2k12 FX2

Love my anzo gen 2s. I got some switch back bulbs for the turn signals.

Attachment 468444

berguy

Sorry for so many posts on the same thread... I went ahead and did 9/3 as stated. I just want to confirm that this cutoff is correct. Everything looks a bit slanted, is that normal?

Also, I have attached a pic of my fogs... were they also installed improperly? They spread very high.

berguy

This is so nice! Where did you get those bulbs? Are they LED?

230748

berguy i didn't see a post of your fogs but you may want to aim your fogs down if you feel they are high.

as for the slantedness... is your truck on level ground?

berguy

In my opinion, they look closer to 5k than 6k. Lots of white. I think I may see a tiny bit of blue on the wall when they shine on their own.

berguy

These are the fogs on their own. The scatter pattern runs very high. I don't mind it at all, I'm just wondering if it bothers oncoming traffic yet. Haven't been flashed yet though.

And yes, it is level horizontally. It's on the same ground as the garage door it shines on.

230748

Not sure, it's not a very good photo since you are right up against your garage and the lights reflecting off everything