Ford F-150 SVT Raptor Power Steering Reservoir Upgrade w/ Cooler Option
07-23-2013, 04:48 PM
#1
F150 Forum
Thread Starter
iTrader: (3)
Ford F-150 SVT Raptor Power Steering Reservoir Upgrade w/ Cooler Option
Power Steering Solution
Ford F-150 SVT Raptor Power Steering Reservoir Upgrade w/ Cooler Option
ICON PSS4007 2010-2011 Ford Raptor
ICON PSS4007-1 2012+ Ford Raptor
ICON PSS4007 2010-2011 Ford Raptor
ICON PSS4007-1 2012+ Ford Raptor
Overview:
After hours of testing and offroad abuse on the ICON Vehicle Dynamics Ford F-150 SVT Raptor we felt solution was needed to further improve the overall performance and function of the OE steering system. When pushing this vehicle to its maximum potential it was apparent that the factory power steering system would develop aeration and lead to a foaming of the fluid in the OE reservoir accompanied with a loud fluid whining or "growling" noise. These symptoms would ultimately lead to reduced life and performance of the steering rack. Power Steering Solution has developed a high performance billet aluminum reservoir that not only increases the overall fluid volume, but includes an anti-cavitation valve as well. The combination of cutting edge design and engineering has led to an easy to install bolt on reservoir upgrade that installs within 30 minutes, in the OEM location, with factory hoses and hardware. The CNC machined power steering reservoir also includes a threaded o-ring cap with a 12psi pop off valve to eliminate increased pressure build during extreme use conditions.
For additional heat dissipation this package includes an inline power steering cooler that is mounted in direct air flow through the front grill. This cooler mounts to the core support and is tucked up high so radiator cooling is not compromised.
Key Features:
• Direct bolt in replacement w/ no additional components required (additional fluid supplied)
• CNC machined from 6061 aircraft grade aluminum
• Threaded o-ring cap w/ 12psi pop off valve
• Built in anti-cavitation valve designed to eliminate fluid ariation / foaming
• Increased power steering reservoir fluid volume with increased flow
• Inline cooler for additional heat dissipation
• High end AN fittings for factory-like seal to OEM power steering lines
• Made in the USA
Tech Info:
• Bolts on easily with basic hand tools
• Includes additional fluid required for installation
Kit Includes:
(QTY - 1) - Fully assembled & ready to install PSS reservoir
(QTY - 1) - Power steering cooler with fittings and hoses
(QTY - 1) - Qt. PSS power steering fluid
• Direct bolt in replacement w/ no additional components required (additional fluid supplied)
• CNC machined from 6061 aircraft grade aluminum
• Threaded o-ring cap w/ 12psi pop off valve
• Built in anti-cavitation valve designed to eliminate fluid ariation / foaming
• Increased power steering reservoir fluid volume with increased flow
• Inline cooler for additional heat dissipation
• High end AN fittings for factory-like seal to OEM power steering lines
• Made in the USA
Tech Info:
• Bolts on easily with basic hand tools
• Includes additional fluid required for installation
Kit Includes:
(QTY - 1) - Fully assembled & ready to install PSS reservoir
(QTY - 1) - Power steering cooler with fittings and hoses
(QTY - 1) - Qt. PSS power steering fluid
07-23-2013, 05:07 PM
#2
Senior Member
Pretty cool, whats the price on these?
The following users liked this post:
Total Automotive Performance (07-23-2013)
The following users liked this post:
rdkev (07-29-2013)
07-29-2013, 09:40 AM
#4
Member
The following users liked this post:
Total Automotive Performance (07-29-2013)
Trending Topics
04-17-2014, 06:22 PM
#9
PLATINUM
I know this is an older post but, I'm curious...do you just leave the old cool unit in the truck and hook the lines up to the new cooler or do you have to remove the old cooler also? My cooler has a leak and this might be cheaper and easier than replacing it.
