1995 F150 straight six. thermostat change
#1
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Boise, ID
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
1995 F150 straight six. thermostat change
anybody have a straight six ford truck? if so have you changed the thermostat on it? i plan to do the same but would like to know the difficulty level and where to start
#2
Hi-Rev Motorsports
yes...I have a 95 300-6...I changed mine to a 160 degree stat...
simple deal took me all of about 20minutes and 10 of that was draining the coolant...
make sure you get a gasket scraper....go to the dollar store and get a 1inch wood chisel...they work very well..
simple deal took me all of about 20minutes and 10 of that was draining the coolant...
make sure you get a gasket scraper....go to the dollar store and get a 1inch wood chisel...they work very well..
#3
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Boise, ID
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
fair enough. this is gonna sound stupid but the only thing i've ever worked on is a small block chevy. so the question is, where is the thermostat housing on my ford?
#5
Just call me sean. Really
Just make sure you get the tstat in there right. There's a tiny lip in the housing you need to rest the thermostat on so it'll seal. Otherwise the stat will slide down and come between the part of the housing that meets the block and it'll cause a leak. How do I know? The dang thing slipped down there 3 times when I was changing mine out.