upper ball joint stuck
01-31-2010, 07:44 AM
#1
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
upper ball joint stuck
96 150, cant get the upper ball joint out, got the camber looking sleave free, and now its all loose but the bottom by the grease fitting is merried, wont budge, already bent one press, wtf, help
01-31-2010, 10:19 AM
#2
Hi-Rev Motorsports
you mean as still stuck in the I-Beam...?
what I did was take a chisel and open the I-Beam split than take a screw driver and pound it in the Camber sleeve to open it and the ball joint popped right out...
if you are talking the top ball joint wont come out of the spindle that is a different story....mine was locked in pretty good but it wasnt stronger than my pipe and 8# mii-sledge an a vice....lol
what I did was take a chisel and open the I-Beam split than take a screw driver and pound it in the Camber sleeve to open it and the ball joint popped right out...
if you are talking the top ball joint wont come out of the spindle that is a different story....mine was locked in pretty good but it wasnt stronger than my pipe and 8# mii-sledge an a vice....lol