Turbo 302 build
#11
Keep in mind it may cost you more, I did buy a lot of parts second hand. http://www.vsracing.net/catalog/prod...roducts_id=812 this is the turbo I'm using on my maverick, get the .68 turbine housing if using a stock engine. Vsracing has most of the other parts you need (wastegate, BOV, intercooler(optional), fuel pump, etc).
http://www.diyautotune.com/catalog/m...ase-p-119.html This is an unassemble msII, you can buy an assembled unit but it will cost more. You and also use a tweecer for tuning and you wont need a trans controller as it works with the factory ecu. I personally like the ms as a stand alone and no maf meter. The injectors, trans controller, and other misc parts can be bought from http://www.summitracing.com. I got my mandrel bends from columbiariver for the hot side and down pipe. Also ebay is a good source for non moving parts(intercoolers, piping,ect.) they make not be the best parts but they'll work.
http://www.diyautotune.com/catalog/m...ase-p-119.html This is an unassemble msII, you can buy an assembled unit but it will cost more. You and also use a tweecer for tuning and you wont need a trans controller as it works with the factory ecu. I personally like the ms as a stand alone and no maf meter. The injectors, trans controller, and other misc parts can be bought from http://www.summitracing.com. I got my mandrel bends from columbiariver for the hot side and down pipe. Also ebay is a good source for non moving parts(intercoolers, piping,ect.) they make not be the best parts but they'll work.
#12
Well, the build won't be happening 😞. BigBlue, my F150 isn't with me anymore because of an a**hole ( can you guess what happened?) so I had to get a 94 exploder 4x4 with the weak 4.0..
#13
Senior Member