Power Steering Pulley Removal and Installation Tool
#1
Junior Member
Thread Starter
Join Date: Oct 2009
Location: Southern Ohio
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Power Steering Pulley Removal and Installation Tool
Where can I get the tools need to remove and install the pulley on a 1987 F150 Power Steering Unit? What is name of the tools so I will know what to ask for?
Thanks
Thanks
#3
Senior Member
Eh, I've always called it a Power Steering Pump Pulley Remover. Basically, a special wheel puller with a clamp to grab the grooved ring around the pulley hub, and a jackscrew that allows one to both remove (pull-off) and install (push-on) the pulley.
Be sure to note where your pulley currently sets with respect to the pump shaft - you will need to re-set the pulley in the same place to maintain belt alignment.
AutoZone, and I would suspect many parts stores, have tool lending / rental arrangements - to avoid buying a tool that will (hopefully) rarely get used.
Be sure to note where your pulley currently sets with respect to the pump shaft - you will need to re-set the pulley in the same place to maintain belt alignment.
AutoZone, and I would suspect many parts stores, have tool lending / rental arrangements - to avoid buying a tool that will (hopefully) rarely get used.
Last edited by wde3477; 10-16-2009 at 08:39 PM. Reason: more info
#6
Junior Member
Thread Starter
Join Date: Oct 2009
Location: Southern Ohio
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the information. The last Ford Truck I owned was a 1970 with a 390 V-8 and this 1987 F150 with a 300 EFI 6 cylinder is a lot different.