yellow52m

I have a 300 5 speed 4x4 with 35's axle code h9b what gears should I run to get a stock feel back

yellow52m

I'm mostly dd on the hwys by stock feel I mean stock rpms at the tight speeds

f150cam

4.10s or 4.56s 4.10s is just a tad under what is required and 4.56s are just a tad over.

yellow52m

Precsion gear makes a 4.30 would that be what u would need

f150cam

to be exact yes, usualy people just get the 4.56s because they dont know what they will do further down the road. you may buy a trailer and need to tow it around. so its nice to have a little to much then not enough or the same IMO lol.

7700SCREW

And I'm not totally sure on this but I think they only make a 4.30 gear set for the rear 8.8 and not for the Dana 44 front axle so guys don't run that ratio on 4x4s. But I could be wrong.

f150cam

i think your right^ didn't think of that lol.

yellow52m

Yeah but the don't make it for the front they make a 4.27 for the Dana 44in the front

yellow52m

How many rpm should I be turning goin 70-75 on the interstate

f150cam

between 1800-2300