|WYG|SS

i got a 93 f150 4.9l 5spd manual lockers on my front tires. and the greese is leaking out onto the tires. my friend had the same problem and said it was the oring gasket. he said thier was no place that makes them. he had recently put on new lockers and i havent looked yet to see if his leak yet. does anyone know where and iff you can get these?

dirtcrew51m

Look for a Graingers or McMaster Carr, they are industrial suppliers, if you can measure the groove on the hub, measure the thickness of the o-ring and look it up. McMaster is open to the public, and I found it the better supplier, I found the snap rings for the front axle.

mitchalvin

I believe that Warn has replacement o-rings for the hubs, remember these hubs are just rebadged warn brand hubs. I checked the part numbers off of my one warn hub and the factory ford on my 83. The warn was a replacement I got at a wrecking yard, the original plastic was cracked from a close encounter with a rock. The only hub he had left was the warn and the one on the other side was toasted by another vehicle. All the numbers stamped into the plastic and aluminum matched side to side. The color and sticker on the plastic are different.