BLDTruth

Disconnect the fuse for the abs and see if it fixes your problem.

fmendez65

Ok going to disconnect it and I will give you guys an update tomorrow.

fmendez65

OK so I lifted the back end and rechecked the drums and ran a dial indicator on the axle and just what I didn't want to see. My axles are bent which was causing my drums to constantly rub and get hot. We turned the truck on and ran the truck on the jack stands and you could see the axles spinning out of round... So I will be replacing axles this weekend... LUCKY ME!!!

FUfarmtruck

im sure if you keep driving it around itll burn off what it don't need, you don't need brakes , brakes are for sissy's. lol. sounds like a mal adjusted adjuster or your e brake cables are a dangling adding tension that way but chances are since it didn't do that before you did the brake job I would go back to zero and start again . could be a froze caliper too

FUfarmtruck

good lord what you been doing with that thing I mean ive seen one side get warbled but warble both sides you had to been jumping it off the sears tower lol

fmendez65

My brother lost control of my truck with a trailer attached to it and jacked knifed it on the highway about 2 months ago and I had noticed something funny since then but I really didn't think it was actually that. I will try to post a link to the video I took of it yesterday... LOL well glad to find the problem cause I got tired of chasing my tail...

ericantonio

Wow good sleuthing! Would love to see pics of the axle and pre/post pics. Thinking of axle swap next year cause thinking of a 4" lift and 32" tires. Will need lower gearing...