wiper cowl
#3
Chris thanks for your reply.
Another basic question, on the 1989 theres a small clip I've taken off the bottom of the wiper arm assembly but the arm still won't come off. Am I missing something in regards to getting the arm of thanks.
Another basic question, on the 1989 theres a small clip I've taken off the bottom of the wiper arm assembly but the arm still won't come off. Am I missing something in regards to getting the arm of thanks.
#4
Senior Member
IIRC, there's a small slider clip that holds the wiper arm off the windshield. Once this is in place to relieve the arm's spring tension, start gently wiggling the arm in and out (towards the windshield and away) while pulling outward at the base of the arm. Whew, almost easier to do than to describe...
#7
Senior Member
iTrader: (1)
The little clip on the wiper arm isn't supposed to come off. You lift the wiper blade away from the w/shield, pull the clip out about 1/8" and let go of the wiper. The wiper should now be held away from the w/shield.
The wiper arm assembly should now pop off the drive piece that turns it. Sometimes they're stuck on there pretty good and you have to get a little physical with it, but at this point it's just pressed on to the teeth
The wiper arm assembly should now pop off the drive piece that turns it. Sometimes they're stuck on there pretty good and you have to get a little physical with it, but at this point it's just pressed on to the teeth