Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

Installation Questions!

Thread Tools
 
Search this Thread
 
Old 04-15-2015, 09:13 AM
  #11  
Member
Thread Starter
 
Hs981's Avatar
 
Join Date: Mar 2015
Posts: 49
Received 0 Likes on 0 Posts
Default

Ohhh thank you! And you're sure that these wire colors/codes match up from Bulldog to the Crimestopper?
Old 04-15-2015, 09:42 AM
  #12  
1994 F150 XLT 5.8L 2wd
 
fltdriver's Avatar
 
Join Date: Mar 2014
Location: Iowa
Posts: 2,150
Received 247 Likes on 237 Posts
Default

Those are the colors/functions of the wires in the truck, you just use that as a guide to install the corresponding wire from your system.
e.g.
It says that the brake wire on your system is Purple, the diagram shows that the brake wire on the truck is light green.

You will just match up the info from yours and the info from the truck, it helps to write it all down on paper and use that as a guide during installation, that's what I did-along with the general location of each truck wire (like @headlight switch, or [MENTION=118676]ignition[/MENTION] switch harness).

One thing I noticed is that your instructions list the starting and some other functions as (-) while our truck uses (+) starting, you may want to call the remote manufactures help line to verify how to proceed if that is the case, I may have also been reading it wrong.



Quick Reply: Installation Questions!



All times are GMT -4. The time now is 10:21 AM.