---------Help!!!!--------- Blinkers quit working, 96'.
#1
---------Help!!!!--------- Blinkers quit working, 96'.
Now the blinkers quit working. One thing after another with this truck...
The hazards work.
I noticed if i held up on the lever it would work sometimes. Now its not working at all.
Yes, I replaced the flasher in the fuse box with a hd one(round silver cylinder.)
I noticed a piece of clear plastic all unwound inside when i took the cover off. Is this the "ribbon" ppl refer to in the steering wheel that operates the blinker on/off.
Im thinking its the switch itself but that ribbon or whatever that was inside is making me think I need to pull the wheel off now and see whats going on, hate to replace that switch when it's something else.
I always noticed it takes a long time for the blinkers to come on and they flash slow before this happened.
Any help is appreciated, thanks in advance!!
The hazards work.
I noticed if i held up on the lever it would work sometimes. Now its not working at all.
Yes, I replaced the flasher in the fuse box with a hd one(round silver cylinder.)
I noticed a piece of clear plastic all unwound inside when i took the cover off. Is this the "ribbon" ppl refer to in the steering wheel that operates the blinker on/off.
Im thinking its the switch itself but that ribbon or whatever that was inside is making me think I need to pull the wheel off now and see whats going on, hate to replace that switch when it's something else.
I always noticed it takes a long time for the blinkers to come on and they flash slow before this happened.
Any help is appreciated, thanks in advance!!
#2
Beer, Boats, and Trucks.
#4
==========UPDATE===========
I did swap the rear flasher and it's still not working.
I bought a new switch assembly and its still not working.
Im guessing I'll just put them on toggle switches.
I did swap the rear flasher and it's still not working.
I bought a new switch assembly and its still not working.
Im guessing I'll just put them on toggle switches.
Last edited by adabiri2; 07-22-2016 at 12:01 PM.
#5
============UPDATE------- Working now==========
I started the truck and now they work. However, I was driving the other day and they did not work.
Right now, if the truck is engine off, but key position to run, like to hear fuel pump run, THEY WILL NOT FLASH/BLINK.
Start truck, they start working again.
Idk, they circled the problem on the front of the grill if you ask me...
I did jiggle the harness but I doubt that did anything. Like I say, why would they not work in run position, but start working once truck is started.
I started the truck and now they work. However, I was driving the other day and they did not work.
Right now, if the truck is engine off, but key position to run, like to hear fuel pump run, THEY WILL NOT FLASH/BLINK.
Start truck, they start working again.
Idk, they circled the problem on the front of the grill if you ask me...
I did jiggle the harness but I doubt that did anything. Like I say, why would they not work in run position, but start working once truck is started.
Trending Topics
#10
Senior Member
Could it be a relay or a bad bulb?